|
Our standard rack for one space V modules (like V70/71/72(A), etc.) are designed so the modules pop
right in and are held down by a vertical bar. The rack is plug and play, comes with a special designed power transformer that
supplies line noise free balanced 2x110V to either one or two V modules. The center tapped ground takes care of all possible
ground loops. Aside from supplying the modules with main voltage it also supplies the 24/48V for indicator and phantom power.
Symmetrical for easy use, all controls are located on the faceplate center. We incorporated the W72 sensitivity switch, originally
used in V series consoles that makes the fixed 34dB gain switchable in 6 dB steps, from -2db to 34dB. All our racks use a
ramped 48V power supply circuit to insure a long life for vintage input transformer.
We also offer a gain control installed inside the hum adjust hole of the V72. The 6 position dual
deck switch is hooked up in parallel to the V72 and switched the AC feedback for gain at the same time as the feedback adjust
for frequency response. This is the only way to operate an historic V72 with a gain control without loosing its classic tone.
With a range from 20dB to 55dB the built-in gain control works in combination with the W72 input sensitivity switch.
Click here to see what user have to say about refurbished and racked V72.
V76’s are rebuilt, changed over to 120V, and an XLR box is added, with rubber feet attached
this is the perfect stand alone unit. Upon request we change any style of V76 to the S specs with all frequency filters, etc.
If an additional rack in needed, we offer a lunch box that fits all two space modules such as the V76, U73, and U83.V76’s
are rebuilt, changed over to 120V, and an XLR box is added, with rubber feet attached this is the perfect stand alone unit.
Upon request we change any style of V76 to the S specs with all frequency filters, etc. If an additional rack in needed, we
offer a lunch box that fits all two space modules such as the V76, U73, and U83.
 
Upon request we supply the lunch box for two one space units like V72, etc. The lunchbox has a build
in balanced step up, that also supplies 24/48V if needed.
If you still can live without a custom rack, we want to let you know that we build racks in any shape
and color.
For U73/83 leveling amplifier we offer a complette change over. For more info please call.
If yours ones come with an historical rack we can add all controls on a seperate face plate.
For more information info@tab-funkenwerk.com
|
